Emergency Plumber London

24/7 emergency service

020 31371718

emergency plumber offers london
3 Common Water Heater Problems That Make Your Hot Water Not Hot Enough

What to Do When the Water Heater is not Hot Enough

Hot water is an important commodity that shouldn’t be taken for granted, especially in cold seasons. One of the worst experiences is not having hot water to have your bath on a cold morning.

Some reasons as to why your water heater might not be working properly are:

  • Bad Heating Element

Failed or the faulty heating element is one of the most common causes of the malfunctioning water heater. You will have to replace your water heater element, and it is quite simple to do so.

  • Faulty Thermostat

The upper thermostat on the water heater controls the upper and lower heating elements; when this is faulty, your electric water heater will not work properly.

When the lower heating element fails, the water will be hot but not hot enough. In this case, you will have to replace the thermostat.

  • Tripped Circuit Breaker

Check the box containing the circuit breaker to see if the water heater breaker has tripped. You can reset it by simply switching the breaker to the “off” position and then back to the “on” position.

If it trips again, then you have to call a water heater repair & installation company in Camden.

What to do

  • Make sure that the water heater you have is the correct size for your house. The amount of water in the heater can reduce if someone showers before you or you are out of hot-water before bathing.
  • Check your thermostat to ensure that it is not set too low and also make sure that the temperature is not above 1200F to avoid scalding, which can cause serious burns.
  • Your dip tube might be broken; this dip tube takes cold water to the bottom of the tank to be heated. When it is broken, the cold water will be entering the pipes before it is heated, but if your water heater was made after 1997, then this might not be the problem.
  • If your water heater is 10 years old or older, your gas valve, thermostat, or heating element might be broken, and you might have to do a replacement.
  • Drain the tank; sometimes, sediments can buildup in the tank and make the healing process slow or reduce the efficiency of the machine.
  • The plumbing system might be old, or it may use cross-connections, and this can lead to lower water temperatures.

How to Fix a Faulty Water Heater

The best way to fix a faulty water heater is to call an emergency plumber. Leave the job to a professional so that you won’t spoil your machine or create more problems. They know just what to do.

They can also give you expert advice like how to drain your tank yourself. We are the best professional plumbing company in Camden, and we offer 24 hours emergency plumbing services, we have experienced plumbers who will attend to your call urgently and resolve whatever problem you have.

Feel free to contact us on 02034752302, and you can be guaranteed reliable and exceptional services at affordable prices.

Call Now Book Now