You can never tell when a device gets old and stopped working altogether. Unless you realise, it would be too late. Similarly, your hot water has got a life. It can’t stay healthy forever. Throughout those winters, the water heater has become our biggest companion. When we tend to lose them because they stopped working, we get into huge trouble because of it.

So how you can predict water heater failure? It is not that easy though! You can follow these guidelines to check if your water heater has come to an end.

The age of the water heater

The maximum strength of the water heater is up to 10 years. After that the parts wear out, corrosion develops, tanks cracks. These things happened once the water heater has reached its deadline.

You should know the age of your water heater so that you can easily replace it without having to suffer from cold water. If you have forgotten the date of instalments, you can always check from the serial number label. Manufacturers always have a note of the month and year each unit is produced within the serial number. The number would be in some code. You can visit the website from where the manufacturer has bought the parts and can interpret it by decoding it.

Knowing when the problem is arising

Every device gives a warning before it cracks. Your water heater will notify you way before you get to know that it has stopped working altogether. Symptoms like cold water or the force of the water running too fast can be indicative of the fact that your water heater is about to collapse.

Such issues can happen when the water heating element has failed. To such cases, water heater repair and installation service in Islington can fix them easily.

The other reasons being damaged parts of the water heater is because of the mineral sediment which forms a coat and becomes hard on the bottom of your tank. Point to be noted is, such signs can only be seen when the water heater is near or around the age of 10 years life cycle.

Tank corrosion because of the rusty water

You can take care of your water heater by doing a routine check. In order to prevent any damage before the 10-year life cycle, you can protect your water heater from damage by calling a plumber on a routine basis to have a thorough check of the parts and the system.

The rod in the water heater can easily get damaged because of the corrosive elements suspended in your water. If the rod is not replaced, it can bring up a corrosive agent that can attack the entire unit.

Tank corrosion is seen in the form of rusty water. A way to check if the water heater has stopped working by flushing your water heater tank. If the water heater has rusted out, it’s better to replace it.

Leakage from the water heater

Leakage from the pipe or water heater can be indicative of the failure. The cause for such leakage could be anything, whether due to rust, manufacturing flaws, damage or other causes. You should check for leakage on a regular basis. If you find any as such, get help from a plumbing company in Islington.

Check for the sound

If your water heater is giving too much noisy sound, it’s time to do a thorough check. Usually, heaters at this point stopped working. This happens when the sediment settles and hardens, it forces your water heater to work harder. If the sound persists, it’s better to replace it.